We've uncovered this great article about How to Troubleshoot and Repair an Electric Water Heater below on the internet and decided it made perfect sense to discuss it with you over here.
Numerous modern-day houses take advantage of an electric hot water heater for their heating system, as a result of its ease and convenience of use. However, similar to any other electrical home appliances, problems might emerge with its usage, all of a sudden. It can be truly irritating to wake up to a cool shower instead of a warm one or having your bathroom with water that isn't hot adequate or even as well warm. Whatever the case might be, hot water heater troubles can be rather aggravating. Fortunately, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of aspects that can cause much of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the issue is, getting it taken care of must not present excessive of a problem if you follow these steps:
Call A Professional:
If after replacing all malfunctioning components as well as resetting your temperature level, the hot water heater still isn't working, you might need to get in touch with a professional plumber for a specialist point of view. The problem with your heating unit could be that the cold and hot faucets have actually been switched over or it may be undersized for the amount of hot water needed in your house. Whatever the instance might be, a specialist plumber would aid address the problem.
Check Your Power Supply:
As standard as this might seem, it is very necessary. Without sufficient power, your water heater will not function. So the first thing to do when your water suddenly stops working is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, just transform it off and on again. Replace any busted or damaged fuse. Test the device with power after these adjustments to see if it's now functioning.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot sufficient, you may need to check the temperature settings on your top thermostat. Make certain the breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This should assist heat up the water. Turn the circuit breaker back on and examine if the trouble has actually been resolved.
Examine the Burner in the Hot Water Heater:
If it's not a power issue, then try checking out your burner if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is defective, replace that component and after that check whether the warm water is back on.
Conclusion
Water heater troubles are not always significant. A number of them are due to small issues like a blown fuse or worn-out burner. Changing the malfunctioning components ought to work. However, if you are still incapable to resolve the problem, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I stumbled upon that piece about No Hot Water — Water Heater Repair when scouting around the search engines. Sharing is nice. Helping people is fun. I praise you for your time. Visit us again soon.
Visit Our Website